Gehl R105 Skid Loader

R105 Skid Loader

  • Height to Hinge Pin - Fully Raised: 2731 mm
  • Rated Operating Capacity: 476 kg
  • Gross Power: 25.5 @ 2800 kW
Find a Dealer Request More Info
Gehl R105 Skid Loader


Gehl R105 Skid Steer Loader

The R105 is built for efficiency. Super Hi-Power drive chains feature heavy, high-strength construction designed for the most rugged conditions.

  • Longer wheelbase and a low center-of-gravity offer a smooth, stable ride.
  • Hydraloc™ automatic interlock system locks lift, tilt and drive systems when the operator leaves the seat, increasing operator safety. System also engages when the restraint bar is raised or the ignition switch is turned off.
  • Lift arm hydraulic tubes are concealed and protected from the work environment.
  • Rated operating load can be readily increased with the addition of a counterweight.
Overall Width (mm) 48.4" (1229)
Overall Height to Top of ROPS (mm)  70.3" (1786)

Operator's Cabin

A large operator’s compartment with clear front, side and rear sight lines provides operators full, expansive views for increased safety.

  • ROPS/FOPS Level II is standard for extra operator protection.
  • Roof grid section and window provide excellent bucket visibility at full height.
  • Adjustable operator restraint bar offers secondary protection and serves as a padded armrest.
  • Lockout system shuts down lift/tilt functions when optional front door is opened.
  • Open canopy, open canopy with door and enclosed cab with heat are available.


Gehl 3640E Skid Steer Loader Cabin Controls

Ergonomic controls in the R105 Skid Loader provide smooth loader and attachment operation.

  • Hand and foot throttle are standard equipment, providing quieter operation and less fuel consumption
  • T-Bar hands-only drive control system


Equipped with a powerful 33.1 hp (24.7) Yanmar diesel engine, the R105 Skid Loader can tackle any challenge.

  • Liquid-cooled for superior performance in all weather conditions.
  • Excellent cold weather starting with glow plug assist system.
Make Yanmar
Model 3TN88CKMS Tier IV
Net Power (kW) @ rpm 33.1 (24.7) @ 2800
Maximum Torque (Nm) @ rpm 80 ft. - lbs. (108) @ 1680
Displacement (L) 100 cu. in. (1.6)


The R105 provides 14.5 gpm (55) of hydraulic flow powering a variety of attachments to get work done faster.

  • Direct-drive hydrostatic pump with self-neutralizing feature provides 100% efficient drive from engine to pump, requiring no maintenance
  • Hydraloc™ Automatic Interlock System increases operator safety by locking lift, tilt and drive systems when the operator leaves the seat, raises the restraint bar or turns off the ignition switch.
Auxiliary Hydraulics - Standard  (L/min) 14.5 gpm (55)
High-Flow Auxiliary Hydaulics - Option  NA
Reservoir Capacity (L) 8 gal. (30.3)

Lift Arm

Gehl R105 Skid Steer Loader

Strong lift arm provides strength, durability and excellent view of the tires and sides of the loader for increased precision and safety.


The R105 has an ingenious design, including low-maintenance components and easy maintenance access.

  • Entire ROPS/FOPS structure pivots back, with gas-spring assist, for full, easy access to the internal hydraulic components.
  • Swing-open rear door and flip-up engine cover fully expose maintenance access points to engine, battery, filters and filler caps.
  • Maintenance-free axles are lubricated and sealed for long life.
  • Removable access plates for clean out.



A  Overall Operating Height - Fully Raised 3546 mm
B  Height to Hinge Pin - Fully Raised 2731 mm
C  Overall Height to Top of ROPS 1786 mm
D  Overall Length with Bucket  2896 mm
E  Dump Angle at Full Height 42°
F  Dump Height 2146 mm
G  Dump Reach at Full Height  579 mm
J  Rollback at Ground 29°
M  Rollback Angle at Full Height 99°
O  Seat to Ground Height 828 mm
P  Wheelbase  876 mm
Q  Overall Width - Less Bucket A  1229 mm
R  Bucket Width  1404 mm
S  Ground Clearance to Chassis  152 mm
V  Overall Length - Less Bucket  2258 mm
W  Departure Angle 26°
X  Clearance Circle – Front w/ Bucket 1763 mm
Y  Clearance Circle – Front w/o Bucket  1120 mm
Z  Clearance Circle – Rear  1374 mm
Standard Specification Tire Size 27x8.5 x 15 HD


Make Yanmar
Model 3TNV88C-KMS
Tier IV
Gross Power @ 2500 rpm 25.5 kW
Net Power @ 2500 rpm 24.7 kW
Maximum Torque 109.4 Nm @ 1820
Displacement 1.6 L

Hydraulic System

Auxiliary Hydraulics - Standard 55 L/min
High-Flow Auxiliary Hydraulics - Option  N/A
Reservoir Capacity 30.3 L

Electrical System

Battery 675 CCA
Starter 2.3 kW
Alternator 40-amp


Rated Operating CapacityB 476 kg
Rated Operating Capacity with Optional CounterweightB 533 kg
Fuel Tank 39.4 L
Travel Speed - Maximum 9.5 km/hr
Travel Speed with Two-Speed Option - Maximum N/A
Operating WeightC - Approximate 1814 kg

A - Overall width is dependent upon the amount of wheel offset.

B - Per SAE J818, SAE J732, and ISO 14397

C - Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 79 kg operator.



T-Bar Hand Controls Available Standard
Hand/Foot Controls Available Standard
Joystick Controls Available
Dual-Hand Controls Available


Engine Auto-Shutdown System  
Engine Heater Optional
Turbocharged Engine


Auxiliary Hydraulics Standard
High-Flow Auxiliary Hydraulics

Operator Station

Cab Enclosure Optional
Foot or Hand-Controlled Throttle Standard
Full Instrumentation Standard
Heater Optional
Horn Optional
Integral Access Plate (Removable) Standard
Restraint Bar with Padded Armrests/Seat Belts  
ROPS/FOPS Level II Overhead Guard, Integral Side Screens Standard
Sound Reduction Package
Suspension Seat - Mechanical Optional
Work Lights, Front and Rear Standard


All-Tach® Attachment Mounting System Standard
Anti-Vandalism Protection Standard
Back-Up Alarm Optional
Brake Control (Auto/Manual) Standard
Hydraglide™ System
Hydraloc™ System Standard
Hydrostatic Drive Standard
Lift Arm Support Device Standard
Self-Leveling Lift Action Optional
Two-Speed Drive


Gehl stands behind its products with a powerful warranty program. We know that Gehl equipment is put to the test each day, and we engineer and build our equipment to stand up to the challenges they face. To back up our commitment to quality, all Gehl equipment is backed by a twelve month warranty. An extended warranty is available for additional protection to your investment. Read more by clicking on the link to our warranty page below.

Gehl Warranty