Gehl RT105 Track Loader

RT105 Track Loader

  • Rated Operating Capacity at 35% Tipping Load: 476 kg
  • Net Power: 26 kW
  • Lift Height: 2769 mm
Find a Dealer Request More Info
Gehl RT105 Track Loader


The Gehl RT105 Compact Track Loader is taking performance to the next level.

  • Tier IV-certified Yanmar diesel engines provide 35 hp (26 kW)
  • The welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.
  • Optional rear bumper/counterweight provides additional protection.
  • Thick steel plating and heavy-duty pins and strengthen the loader for extreme-duty work.
  • Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.
Height to Hinge Pin - Fully Raised (mm) 109" (2769)

Operator's Cabin

Gehl RT105 Compact Track Loader

The extra-large, state-of-the art operator’s station on the RT105 Track Loader is designed for optimal operator comfort resulting in more productivity.

  • Cab forward design enhances the view to the bucket.
  • Level II FOPS is standard equipment.
  • Complicated gauges and cluttered dash readouts are eliminated with a customizable, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens.
  • Optional pressurized sealed cab enclosure, sound reduction material and rear-mounted air filter provide a comfortable, clean and quiet operating environment.


Controls on the Gehl RT105 Compact Track Loader are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.

  • Standard Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.
  • Multi-purpose LCD display provides easy readout during operation.
  • Easy Manager Telematics


The RT105 engine is packed with plenty of low-end torque, just what a track loader needs to power through the toughest jobs.

  • Automatic glow module engine intake heating system provides superior cold-weather starting.
  • Engine warranty, parts and service are handled through dealership servicing in conjunction with Gehl parts and service support.
Make/Model Yanmar/3TNV88C-KMS Tier IV
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders (L) 100 (1.64 L / 4)
Gross Power (kW) @ rpm 35 hp (26) @ 2800
Peak Torque (Nm) @ rpm 80 ft.-lbs. (109) @ 1820
Alternator Voltage/Amperage 12V/55A
Gehl Track Loader RT105 Engine Access


The RT105 Compact Track Loader hydraulic system is engineered to push more material, lift heavier loads and power demanding attachments.

  • Standard auxiliary hydraulics are designed to handle virtually every flow/high performance attachment.
  • New cast-iron pump design delivers efficient flow at higher temperatures.
  • Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
  • Direct engine coupling provides high operating efficiency.
  • Power track drive motors deliver superior pushing power.
  • Auxiliary hydraulic quick couplers for fast, efficient attachment changes.
Auxiliary Hydraulic Flow - Rated Speed (L/min) 14.5 gpm (55)
Transmission Pump Type Axial Piston
Motor Type Radial Piston

Attachment System

The RT105 Compact Track Loader is available with your choice of two attachment mounting systems designed to enhance jobsite efficiency.

  • All-Tach® system manually engages and disengages with a single lever.
  • Both systems are compatible with all universal-style track loader attachments.
EDGE Attachments for RT105

Lift Arm

Gehl RT165 Compact Track Loader Hydraulics

The robust lift-arm on the RT105 Compact Track Loader is designed for optimal strength, visibility and capacity.

  • Additional reach and increased dump height result in more efficient load placement and overall performance.
  • Low-profile design provides outstanding forward, rear and side visibility.
  • Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
  • Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
  • Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.
Height to Hinge Pin - Fully Raised (mm) 109" (2769)
Reach - Fully Raised (mm) 26.5" (673.1)


Serviceability is very important to our customers. The RT105 is sure to exceed your service expectations.

  • Large, gas-spring assisted engine cover and over-sized allows full access on the rear of the machine for servicing and maintenance
  • Entire ROPS/FOPS assembly tilts rearward with large gas-springs for easy internal service access.
  • Track rollers and idlers are sealed and require no maintenance.
  • Coded wiring takes the guesswork out of electrical system identification.



A  Overall Operating Height - Fully Raised 3650 mm
B  Height to Hinge Pin - Fully Raised 2769 mm
C  Reach - Fully Raised 673.1 mm
D  Dump Angle - Fully Raised 38°
E  Dump Height - Fully Raised 2134 mm
F  Maximum Rollback Angle - Fully Raised 102°
G  Overall Height at ROPS 1816 mm
H  Overall Length with Bucket - Standard Counterweight 2985 mm
I  Overall Length without Bucket - Standard Counterweight 2258 mm
J  Specified Height 1466 mm
K  Reach at Specified Height 991 mm
L  Dump Angle at Specified Height 72°
M  Maximum Rollback Angle at Ground 32°
N  Carry Position 127 mm
O  Maximum Rollback Angle at Carry Position 32°
Q  Angle of Departure with Standard Counterweight 35°
R  Ground Clearance 191 mm
S  Track Gauge 1039 mm
U  Crawler Base 1283 mm
V  Overall Width - Less Bucket 1290 mm
W  Bucket Width 1372 mm
X  Clearance Radius - Front With Bucket 1854 mm
Z  Clearance Radius - Rear with Standard Counterweight 1290 mm


Operating Capacity at 35% Tipping Load 476 kg
Operating Weight 2141 kg


Make/Model Yanmar/3TNV88C-KMS Tier IV
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders 1.64 L/4
Gross Power @ rpm 26 kW @ 2500
Peak Torque @ rpm 109 Nm
Alternator Voltage/Amperage 12V/55A

Track Drives

Track Type/Track Rollers/Roller Type Rubber/3/Steel
Track Width 250 mm


Fuel Tank 36 L
Hydraulic Reservior Tank 30 L
Coolant Capacity 6.62 L


Auxiliary Hydraulic Flow - Rated Speed 55 L/min
Transmission Pump Type Axial Piston Variable Double Pump
Motor Type Radial Piston Motor w/ Two Speed

Electronic System

Battery Volts 12V
Cold Cranking Amps at Temperature 800 CCA @ -18°C

Sound & Vibration

Sound Power (Environmental) 101 dB(A)
Operator Ear 85 dB(A)

Gehl Compact Track Loader RT250 Specifications Diagram



All-Tach® Mounting System Standard
IdealTrax™ Exclusive Standard
12-Volt Battery Standard


Engine Alert System with Error Display Standard
Engine Automatic Shutdown System Standard
Glowplugs Starts Assist Standard
Dual-Element Air Cleaner with Indicator Standard

Hydraulic System

Auxiliary Hydraulics Standard


Elevated Planetary Final Drives Standard
Maintenance Free Rollers Each Side 3
Single Flange Front/Dual Flange Rear Idlers Standard
Rubber Track Undercarriage System Standard


Back-up Alarm Optional
Combination Radiator & Hydraulic Oil Cooler Standard
ROPS/FOPS Level II Overhead Guard Standard
Anti-Vandalism Lock Provisions Standard
Mechanical Lift Cylinder Lock Standard

Operator's Station

Pressurized Cab Enclosure Optional
Multi-Function Function Display Screen Standard
Foot Throttle
Hydraulic Pilot Joystick Controls Optional
Full-Suspension Seat Optional
Cushioned Seat Standard


Gehl stands behind its products with a powerful warranty program. We know that Gehl equipment is put to the test each day, and we engineer and build our equipment to stand up to the challenges they face. To back up our commitment to quality, all Gehl equipment is backed by a twelve month warranty. An extended warranty is available for additional protection to your investment. Read more by clicking on the link to our warranty page below.

Gehl Warranty

Sign Up For Our Newsletter